Home > Education Center > Appliance Repair Los Angeles
 CLICK for Washing Machine Repair Companies in Los Angeles 

By MyPros Staff

Seeking professionals for appliance repair, Los Angeles residents turn to the web.  Who is the best professional to get the job done quickly, efficiently, and affordably?  Finding that one company that can meet all of your needs may sound a bit tricky, but in fact it is very easy to know which one is best for all of your repair requirements. Look for the company to meet your needs before picking up the phone to call them.

Rated Washing Machine Repair Companies in Los Angeles, CA

A good place to start is with their ability to get to you quickly. In emergency situations, such as air conditioners, furnaces and refrigerators which are not working, emergency service is an option through most of the appliance repair technicians. For most other needs, same day or next day service is the best option so prices stay affordable. In terms of pricing for appliance repair, Los Angeles pricing will range per project. Most technicians are able to give you a ball park figure of cost if you ask them for it. An estimate is the best way to get a low cost, though.
Efficient, quality work is always important when your appliances on the line. In a city of 3.5 million people, finding the best appliance repair professionals is very possible. You could find yourself with professionals able to meet even your most stringent requirements. Call on these professionals for fast answers to your questions or to schedule an appointment with them. Your repair needs should not have to wait; you don't want them to wait, either.

Posted by:
Filed under: Appliance Repair
Related Stories: appliance repair Los Angeles  •  Los Angeles appliance repair  •  Los Angeles  •  appliance repair  •  appliance repair company  •  appliance repair help  •  appliance repair  •  repairman  •  repair company  •  repair technician

Don Deluca   Thursday, December 04, 2008, 6:34:23 PM
I have a GE gas range. Last night, the range started clicking. The clicking noise was coming from the electrode(spark igniter) In order to stop the clicking, I had to remove the electrical plug from the wall. After checking it this morning, the igniter and wire to the spark igniter module appeared to be ok. Could the problem be the module?? The mdule is a Harper-Wyman Model 6520 Kool Lite. Another question is on the back of the module there is are two connector plugs. The plug on the left has a "N" above it and the plug on the right has a "L" above it. Does the yellow wire from the on/off knobs go to the "L" plug and the black wire from the outlet plug go to the "N" plug. Thanks for your help.

KEVIN   Sunday, December 28, 2008, 3:41:44 AM

michael   Friday, January 09, 2009, 6:37:45 AM
I have a Admiral Designer Series Model HMG 19145 refrigerator freezer is cold but the refrigerator is warm. Ice builds up on the top of the refrigerator below the freezer,and some on the bottom of the freezer Would yoy please give me some advice how to fix this problem Thank you ever so much. Michael

Floyd Christie   Thursday, February 05, 2009, 10:17:08 AM
Hey Gene I have a Frigidaire microwave model # FMV 156DCC, I get no heat, or burning smell and everything works ok. could you comment on this as to wether this is the magnatron and rectifier tube.

Thanks you

Gene   Thursday, February 05, 2009, 1:26:06 PM
Hello Floyd, If the interior lights, the turn table and the cooling fan still work after you pushed the Start button and there is no unusual noises then the problem could be a bad control board or a bad magnetron. Open the control panel, remove the wires form the high voltage transformer primary windings and check for 120VAC between these wires while the control calls for heat and the door is closed. If there is proper voltage then the magnetron has to be replaced. If there is no 120VAC then the control board has gone bad. Gene.

Gene   Thursday, February 05, 2009, 1:30:41 PM
Hello Michael, Looks like the drain in the refrigerator is clogged and/or frozen. Remove the rear panel in the freezer and, using a hair dryer and a turkey baster with hot water, defrost and unclog the drain. Remove the cover on the back of the refrigerator and make sure the other end of the drain hose is open. Gene.

mark   Monday, February 09, 2009, 8:39:59 AM
Gene please help.
I bought a used washer for my daughter for colledge and it seemed to run fine until I got it home and ran it through an entire cycle....no spin cycle
I have been following your advise on line and need help with my frididaire top load washer # FWS445RFS2.Goes through ALL cycles except "spin". Motor turns in spin but belt doesn't move. There is no voltage at door switch when spin cycle is on. It will wash drain adjitate, but no "spin"

Gene K   Monday, February 09, 2009, 4:20:24 PM
Hello Mark, If the motor moves at the spin cycle, but the basket does not then it could be a bad belt or a bad transmission. Remove the belt and inspect it. In addition, check the idler pulley and the belt tension spring. With the belt "off" turn the transmission pulley CCW and see if the basket will spin. If the pulley is not moving then the transmission has gone bad. Go to the AppliancePartsPros.com and type the model number in the search box to view the diagrams and parts list. Gene.

Debbie Massey   Wednesday, February 11, 2009, 3:18:30 PM
I have a bosch dishwasher 2 yrs old and after started for a couple of minutes it starts shifting back and forth like it is trying to drain or fill up. It switches back and forth atleast 5 times. I was at a friends last night as she was putting dishes in her washer and made the comment that I would never put some of the things in my dishwasher that she was putting in as they would never come clean. I notice even silverware looking dingy, especially peanut butter. Another question, I have a gas stove on propane and when turning the oven on you really get a strong smell and eye burning. This happens only in the first couple of minutes. Thanks..Hope you can help me. Debbie

Gene K   Wednesday, February 11, 2009, 3:37:45 PM
Hello Debbie, In order to provide most accurate advise I need the complete model number of the dishwasher. In addition I need to know what kind of soap did you use? Gene.

john   Thursday, February 19, 2009, 6:41:55 AM
hello,ihave a kenmore gsa oven/sealed burner,model#3627556891.the oven will not heat up at all,no igniter glow either for the broil or bake? but the top burners work just fine.i'm thinking maybe i should replace the gas valve? any help would be great.

Gene K   Thursday, February 19, 2009, 12:06:43 PM
Hello John, The first thing I would do is check for 120 VAC to the Bake igniter while the control calls for Bake, and to the Broil igniter while the control calls for Broil. If there is no proper voltage then check for continuity between the Bake terminals and the Broil terminals on the gas valve. If there is no continuity then the gas valve has to be replaced. Otherwise the problem is a bad control board. Unfortunately, the control board has been discontinued by the manufacturer and is no longer available. Gene.

Milz   Saturday, February 21, 2009, 6:37:45 PM
Hopefully Gene or someone out there can help me.I have a Kenmore Refrig model #106.52522101. The water dispenser just up & quit dispensing water. The lever you push to dispense water has no resistance when you push on it. The ice maker is still working. Is there a part I can buy and how difficult is it to replace. I realize it's not emergent but the repair guy I called keeps saying he is too busy to get to it and he has to research it on internet so I thought I'd try it on my own!! Thanks, Milz

Gene K   Sunday, February 22, 2009, 9:15:47 PM
Hello Milz, The model number you posted does not come up. Please, verify and repost it. Gene.

Gene W.   Monday, February 23, 2009, 6:40:52 AM
Hello, I have a Bosch washer machine WFK2401UC and I found a burnt power board and replaced it, the washer still stops, with default code 01 Can you please tell me what that means. Thanks, Gene W.

Gene K   Monday, February 23, 2009, 10:17:42 AM
Hello Gene, "01" fault code means "No water filling". You have to check the water valves and the pressure switch. Gene.

Judy Qiu   Tuesday, February 24, 2009, 8:14:59 AM
Hello Gene,

My friend's refrig is not working:
refrig compartment is working, but freezer is working for 1-2 days, then not work.
The defrost timer replaced, not solved the problem. Any suggestions? Thank you very much.

Gene K   Tuesday, February 24, 2009, 1:59:40 PM
Hello Judy, In order to provide most accurate advise I need the complete model number of the refrigerator. Also, can you be more specific on the problem? Gene.

Judy Qiu   Tuesday, February 24, 2009, 8:34:28 PM

Thank you very mucy for the response.
The refrigerator brand is Kenmore, side-by-side.

Problem: both freezer and refrig works at begining. a day later, top two drawers (four drawers total) seems not freeze,bottom two drawers are freezing. Refrig side seems OK. When this happened,
power disconnected. wait for a day, then cycle start again. Is that given you idea what might go wrong?
Thanks for your time.

Michael   Monday, March 16, 2009, 11:30:31 PM
I have a MIELE G858 SCVI Dishwasher.
It stopped draining, water sits there. I did all the internal cleaning, and checked all out let pipes and internal valves. I called MIELE in NJ, they think it's the motor pump or the connection to it. Part is $130. I'm worried I buy it, install it, and it's not the problem.
If I can find a cheaper AFTERMARKET pump, I could take a risk. Anyone have any ideas? I'm in Los Angeles.


Godfrey   Saturday, March 21, 2009, 11:29:32 PM
Hi Gene,
The microwave oven Whirlpool MH7130XEB0 stop heating. Looks like any other function is working - like the lights, fan, internal light, turn table etc. What may be the problem ?. Is it worth spending money on this 1997 model ? How much it may cost for the possible replacement item(s) like Capacitor or Magneton etc ?


Gene K   Sunday, March 22, 2009, 3:02:39 PM
Hello Godfrey, In such situation the problem could be a bad magnetron or a bad control board. Both parts are close to $200 and even if you'll do it yourself it's not worth it. Looks like it's time for a new microwave. Gene.

Mrs. Rozenberg   Tuesday, March 24, 2009, 8:52:08 PM
Thank you Gene

Jacqui   Monday, April 06, 2009, 8:52:46 AM
I have a GE Model# RGB508PEH3WH gas oven and I want to know if the part # WB19k31 is what is needed to make the flame return oven burner. The burner igniter is still working but then when the flame went out and gas was leaking. But now the gas is not coming out of the oven burner and the burner will not light. So is that the correct part to order to fix my oven?

Gene K   Monday, April 06, 2009, 3:12:40 PM
Hello Jacqui. It looks to me like the first failure suspect is the oven igniter. AppliancePartsPros.com part number for the igniter is AP2020569. Gene.

David   Thursday, April 09, 2009, 9:11:37 AM
Gene -

I have a Jenn Air Model JFC2089HPY.
The icemaker stopped making ice. I thawed with hairdryer. Tray refilled, froze, but will not eject. Rethawed, dried out tray. tray refilled, froze, but will not eject.

Gene K   Thursday, April 09, 2009, 2:29:01 PM
Hi David. Your question has been answered on the Forum here: http://forum.appliancepartspros.com/refrigerator-freezer-repair/10805-icemaker-wont-drop-ice.html#post77406 Gene.

karen   Tuesday, April 28, 2009, 9:47:20 PM
I have a Frigidaire Custom Imperial. The front right burner (sensor burner) stopped working just yesterday after the housecleaner cleaned the stove. Were the wires pulled or disconnected? I'm in the San Fernando Valley looking for a repair person. Any recommendations? Thanks in advance.

Gene K   Wednesday, April 29, 2009, 6:22:24 PM
Karen, You can call West Coast Chef Repair: http://www.mypros.com/businesses/west-coast-chief-repair-los-angeles-ca Gene.

Jason   Thursday, July 23, 2009, 11:11:29 PM
Hey Gene,
I have a Maytag gas dryer(MDG7600AWW)that heats up for a few minutes then cools down. I open up the front panel & run the dryer.I noticed the igniter glows then it lights up with the gas for about a minute.
Then it stops, but the drum is still spining. I open the door then close it & I start the dryer again. This time the igniter glows but no flame.

Can you Help ??


Gene K   Friday, July 24, 2009, 12:30:55 PM
Hi Jason, I would replace the gas valve coils. AppliancePartsPros.com part number for the coil kit is AP3094251. Gene.

steve   Friday, July 24, 2009, 1:30:00 PM
Gene - The door gasket on the top left of my Kenmore Freezer is not sealing from the left hand corner to the right for about 4-6 inches. I took the gasket off of the door frame (gently) and it now does seal to the freezer. Do i need to leave it this way for a certain amount of time to get the seal corrected? Also, when i readjusted the gasket to the door (there is a frame with screws that it attached to), it is now off of the door about 1/16th of an inch. Is this going to cause a frost problem for me? And if so, any suggestions to correct this? Thanks for your help. steve

Natacha Mitchell   Thursday, August 13, 2009, 6:31:29 PM
We need to replace the inner glass in a Whirlpool oven range.Somehow it cracked. If I order part online, how does glass stay in place when attaching to inner door panel. Do I replace entire inner door pannel with glass already attached or do I completely remove glass and replace with new piece of glass? Also, we have a whirlpool refrigerator/freezer and the ice maker does not work (5 yrs old). It may make ice once in blue moon but very sporatic. What could be the problem and how do we remedy it? Thanks for any help.

Phyllis   Tuesday, August 18, 2009, 10:12:03 PM
Hi I have a Modern Maid KGT 583 A cooktop, its grates are in pretty rough shape, anybody know if I can get them replaced? Also did they originally come with drip pans? I am thinking I may have to powder coat them if I can't find new ones, have never done that will it work?

Adam B   Wednesday, August 19, 2009, 1:53:38 PM
Natacha Mitchell - Below are a couple links to a repair forum on AppliancePartsPros.com that may help with installing the door glass. If you dont find the answer to your question on the door glass or icemaker you can also register for free and post your question. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/30948-replacing-inner-door-glass.html http://forum.appliancepartspros.com/search.php?searchid=951335 You can also order the parts you need on AppliancePartspros.com Hope this helps :)

Adam B   Wednesday, August 19, 2009, 2:01:56 PM
Phyllis - You can still get the grates and drip pans for your cooktop at AppliancePartsPros.com. The grates are part number AP4037167 and are $18.96 each. The drip pans are part number AP4272689 and are $6.77 each. Click on the two links below to see pictures and order them. http://www.appliancepartspros.com/part_details.aspx?part_id=4272689 http://www.appliancepartspros.com/part_details.aspx?part_id=4037167

phyllis   Wednesday, August 19, 2009, 9:21:46 PM
Wow Adam....thanks so much!

ivan   Thursday, August 27, 2009, 12:39:15 PM
I have a frigidaire Dryer that lights on but doesnot start. Modul:GLGQ2152ES0

Daniel   Thursday, September 03, 2009, 4:20:27 PM
Hi, Gene... Thanks so much for the help you've been to all the people I've seen post their repair problems. Maybe you can help me, too. I have a Sears Kenmore refrigerator with bottom freezer. The freezer works fine, but the top refrigerator doesn't get very cold. Played around with cleaning coils, turning the thermostat back and forth. All seals appear fine. Door closes properly. Just can't get the refrigerator to chill the milk and other foods. I've been laid off my job because of this recession. Any inexpensive fixes a lay-guy can do? Would greatly appreciate your kind advice. Thanks, Gene.

Gene K   Thursday, September 03, 2009, 6:37:33 PM
Hi Daniel. Please post your question together with the complete model number of the refrigerator on the forum: http://forum.appliancepartspros.com/ and I'll be glad to help you. Gene.

Gene K   Thursday, September 03, 2009, 6:37:33 PM
Hi Daniel. Please post your question together with the complete model number of the refrigerator on the forum: http://forum.appliancepartspros.com/ and I'll be glad to help you. Gene.

Gene K   Thursday, September 03, 2009, 6:37:34 PM
Hi Daniel. Please post your question together with the complete model number of the refrigerator on the forum: http://forum.appliancepartspros.com/ and I'll be glad to help you. Gene.

Gene K   Thursday, September 03, 2009, 6:37:34 PM
Hi Daniel. Please post your question together with the complete model number of the refrigerator on the forum: http://forum.appliancepartspros.com/ and I'll be glad to help you. Gene.

Gene K   Thursday, September 03, 2009, 6:37:35 PM
Hi Daniel. Please post your question together with the complete model number of the refrigerator on the forum: http://forum.appliancepartspros.com/ and I'll be glad to help you. Gene.

Gene K   Thursday, September 03, 2009, 6:37:36 PM
Hi Daniel. Please post your question together with the complete model number of the refrigerator on the forum: http://forum.appliancepartspros.com/ and I'll be glad to help you. Gene.

Gene K   Thursday, September 03, 2009, 6:37:36 PM
Hi Daniel. Please post your question together with the complete model number of the refrigerator on the forum: http://forum.appliancepartspros.com/ and I'll be glad to help you. Gene.

Daniel   Thursday, September 03, 2009, 8:42:21 PM
Hi, Gene: Responding to your request for the make and model of the refrigerator. It’s a Kenmore, model number 596.79272991; serial number is 0003171130. Freezer is okay, but refrigerator not cooling food items like before. Please tell me what to do. I'd appreciate it. Daniel

AB   Monday, September 07, 2009, 2:13:38 PM
Gene, Can you come out and change my felt seals on my Duet Dryer? I am in Orange County.

Pat   Wednesday, September 16, 2009, 11:12:44 PM
Gene, you are the man. Can you also help me? I posted a question on the appliance repair forum and have not gotten a response. I am trying to replace the timer clock in my electric stove top. It's making a buzzing sound. If you can respond to my posting, that would be great. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/47046-replacing-timer-ge-electric-stove-top.html Thanks!

Daniel   Thursday, September 17, 2009, 11:29:24 AM
Hi, Gene... For my Kenmore, model # 596.79272991, serial # 0003171130, I cleared out all the ice from the backside of the lower freezer and also from behind the panel. The cold air started returning to the upper refrigerator and then everything was fine. But, after 2-weeks the refrig is starting to warm up again and food doesn't stay cold. I think the rubber seals around the door are not sealing properly. Can you tell me how to replace them? Or can you come out to do the work? I'm in the historic West Adams area of Los Angeles. (PS Never got a response from you from my Sept 3 post)

Jon   Sunday, September 20, 2009, 11:59:21 AM
Good Afternoon

I have an Admiral HMG19146 refridge and frezzer that I am having problems with the icemaker. The unit makes ice but in the process of filling leaks water into the ice holding container which then freezes solid. No other leaks that I can see only when filling tray with water after fresh ice is made and dropped into tray.

Your thoughts would be appreciatied.

mary   Wednesday, September 23, 2009, 7:20:42 PM
hi my name is mary im from houston
an i have a problem wit my washer machine
is kenmore smartwash an the frist the door is not open an no lait at the panel
what is F 70 N F 20

Daniel   Thursday, September 24, 2009, 12:49:35 AM
Gene- I have a problem w/ my fridge, it will not dispense ice or water. I posted all of the details on "forum.appliancepartspros.com". Can you take a look maybe? How is beautiful OC by the way. I miss living there. Thanks DT

John   Tuesday, October 13, 2009, 9:36:04 AM
Hello Gene,

Thank you for sharing your knowledge to help us fix these wonderful appliances.

I have a Whirlpool ed25texhn00 and the ice maker will not fill. It goes through its ejection cycles fine. It has the quad valve 2206123 Whirlpool Quad Water Inlet Valve. The water dispenser works fine, but the valve does not open to send water ti the ice maker. To test the valve, I switched the electrical connection plug from the water dispenser valve to the ice maker valve and pushed the water dispenser arm to fill the ice maker. I heard a hum, but the water did not fill the ice maker. I have checked to make sure the line is not obstructed. I also checked for 120V on the ice maker electrical connection during the ice maker cycle when it should call for water, but did not get any voltage. I also checked the continuity on the solenoid or both and found that there was no continuity on the ice maker solenoid but there was on the water dispenser. Sounds like the ice maker solenoid i

Linda   Friday, October 30, 2009, 2:43:14 PM
Hello, I have a LG range model LST5601ST and some grease from a pot spilled into the door vent and ran down the inner glass on the door. I ran a self clean cycle and it cleaned the oven as usual but did not clean the inner glass. Could you please offer a suggestion on how to clean the glass? Can the oven door be disassembled or do I need a new door? Thank you in advance for any suggestions.

Jayne   Wednesday, June 16, 2010, 11:54:38 AM
Hi, I have a Modern Maid Gas Cooktop KGT583A, and I don't have any knobs. Where do I get replacement knobs? Can I substitute chrome?

Adam B   Thursday, June 24, 2010, 1:11:51 PM
Jayne, According to your model your knobs are part number AP4251276 and come in a set of two for $22.34 Click on the URL below if you would like to order them http://www.appliancepartspros.com/part_details.aspx?part_id=4251276

Leave Your Comment
Name: (required) 
E-mail: (required, but will not be displayed) 

Comments are moderated by MyPros.com, in accordance with our comment policy, and may not appear on this blog until they have been reviewed and deemed appropriate for posting.


Search Articles